Double Sided LED Snap Frame | Prime Light Boxes

DOUBLE SIDED LED SNAP FRAME

Color Temperatures: 6500K

Frame Colors: Silver, White, Black, and Custom

Mounting Option: Hanging

Power Supply Options: Plug-in, Hard Wire

Canada-CSA-1 | Prime Light Boxes

Made in Canada

We ship anywhere in USA and Canada

Our LED Snap Frames are built using our state of the art LED Panel technology. The LED Panels create a thin, bright, and even light source for the LED Snap frames. LED lights are mounted on the edges of a crystal clear acrylic sheet, and an even light is achieved by a special pattern that is etched on the surface of the acrylic. The LED panel illuminates the translucent graphics placed between the edged acrylic and a clear acrylic cover. We manufacture large snap frames, up to 36” X 72”, with quality raw materials.

We manufacture LED Snap Frames, single sided, and double sided. Our light boxes are bright, long-lasting, energy-saving and CSA/UL (US, CA) certified.

Frequently Asked Questions

LED SNAP FRAMES

WHAT IS A SNAP FRAME LIGHT BOX?

A snap frame light box is made of an aluminum frame that has a easily opens of four sides, and after placing a poster behind its clear cover, you can snap the four sides back and have the poster held nicely and flat on it.

ARE LED SNAP FRAMES BACKLIT OR EDGELIT?

The LED snap frames are in fact edgelit. There is a laser engraved acrylic on the frame, and reflect the light, when the light hits the engraved dots on it. The LEDs are inside the frame, normally on the longer side, aiming the light to the middle of the engraved acrylic. since the entire engraved acrylic illuminates, some call the light box backlit.

DO YOU MAKE CUSTOM SIZES?

Yes. We make any size snap frame up to 50” wide and 98” tall. Contact us to get a quote.

IS THE INSTALLATION EASY?

Prime Light Boxes has designed the LED snap frames with a very easy way to install. See the installation videos.

DO YOU PRINT POSTERS FOR THE SNAP FRAMES?

Yes. we manufacture the light box and can have your images printed on high quality materials. All you need to do is to send us the images you like, and we ship the whole package to your address. 

IS IT EASY TO CHANGE THE POSTERS?

It takes a couple of minutes to change the posters. See the Installation Videos.

CAN I ORDER MORE POSTERS LATER?

Yes. All you need to do is to upload your images and give us the sizes of the posters. We would print them in a short time, and send them by UPS. Contact us to get a quote.

IS PRIME LIGHT BOXES THE MANUFACTURER?

Yes, we manufacture all our products in our shop, located north of Toronto, Canada. 

WHAT ARE THE LARGEST AND SMALLEST SIZES OF THE LED SNAP FRAMES THAT YOU MAKE?
 

The largest size of the LED Snap Frames that we manufacture is 50" X 98", and the smallest one is 18" X 18".

DO YOU MAKE NON-LIT SNAP FRAMES?

 Yes. Simply send us a request, with the quantity and sizes you need, and we will send you a quote.

WHAT IS THE THICKNESS OF THE FRAME?

Our LED snap frames are 1” thick. The frame is 1-5/8” wide.

HOW DO I DETERMINE THE SIZE OF THE POSTER FOR MY SNAP FRAME?

The size of the poster for our LED snap frames can be determined by deducting 2.5" from each dimension. For example: the poster size for a frame that is 24" X 36" would be 21.5" X 33.5". See the details of a typical frame here.

WHAT ARE THE AVAILABLE COLORS FOR THE FRAMES AND COLORS FOR THE LEDS?

We produce our LED snap frames in white, black, and silver. We also have two color temperatures to choose: 4100K (daylight), and 6500K (cool white).

WHAT ARE THE OPTIONS FOR POWER SUPPLIES (DRIVERS)?

We normally ship our LED snap frames with plug-in power supplies. We also have hard-wire power supplies, as well as dimmable power supplies. Contact us for more information.

ARE THE LED SNAP FRAMES DIMMABLE?

Yes, our LED Snap Frames are dimmable. However, you need to decide between two ways of dimming them. 1) Dimming them with a low voltage dimmer, where you connect the power supply to a dimmer that comes with a remote, and then connect the dimmer to the snap frame (all done with simple male-female connections), or 2) Use a dimmable power supply, in which case you need an electrician to connect all to a wall dimmer.  

WHERE THE WIRE COMES OUT OF THE LED SNAP FRAMES?

The wire (the lead) is normally 4', and comes out of the back of the frame, normally, from the middle of the shorter side. You can request a different configuration, if you like.

HOW DO I INSTALL MY SNAP FRAME WITH THE WIRE AND THE POWER SUPPLY BEING NOT VISIBLE?

You can install the power supply in a back room, or in the ceiling, and bring the wire from the back of the frame, inside the wall, and connect it to the power supply. It’s not recommended to put the power supply in the wall, as it needs ventilation to avoid any fire hazard.

CAN I USE MULTIPLE SNAP FRAMES WITH ONE POWER SUPPLY?

Yes, but it depends on the sizes of the frames. A typical LED snap frame is 50 watts, and a maximum of 6 of those frames can be connected to one of our 350 watt power supplies. You need an electrician to do the electrical work.

WE PRODUCE ALL OUR PRODUCTS IN CUSTOM SIZES

Price Based Country test mode enabled for testing United States (US). You should do tests on private browsing mode. Browse in private with Firefox, Chrome and Safari

0
    0
    Your Cart
    Your cart is emptyReturn to Shop